PAIR PRV Audio D290Py-S 1" Polyimide Compression Driver + FREE WG17-25 Horn & Capacitor

PRV Audio Brazil
$139.96 $129.96 (You save $10.00)
Be the first to leave a review
Weight 9.00 LBS
Height 7.00
Width 10.00
Depth 5.00
Availability In Stock
Shipping $0.00

PRV Audio D290Py Combo

This Combo offers you outstanding response through 19kHz with its unique polyimide diaphragm which offers unsurpassed vocal and midrange reproduction with waveguide that expands horizontal dispersion


2x D290Py-S Compression Driver

2x WG17-25 Waveguides - FREE HORNS

2x FREE CAPACITOR - only to help prevent damage from low frequencies to the driver - must use recommended crossover by PRV Audio it does not guarantee to prevent damage


Save NOW With DJ Stage Gear Combos 


PRV Audio D290Py-S 1" Polyimide Compression Driver 8 Ohm

The PRV Audio D290Py-S 1" Pro Audio Compression Driver offers unsurpassed vocal and midrange reproduction.

The specially designed polyimide diaphragm sounds very similar to the silk and textile dome tweeters used in high-end home audio speakers and studio monitors. PRV Audio combines this diaphragm with a high-energy motor for high output over the usable driver bandwidth for effortless, dynamic output.

Throat Diameter: 1"

Type: Screw-On

Nominal Impedance:

Rated Power Handling: 90 Watts

Program Power: 180 Watts

Sensitivity (1W/1m): 109 dB

Frequency Range at -10 dB: 650 - 19,000 Hz

Recommended Hi Pass X-Over: 1000 Hz (12 dB/Octave)

Voice Coil Diameter: 1.75"

Magnet Material: Ferrite

Diaphragm Type: Polyimide

Weight: 4.96 Lbs

Replacement Diaphragm: RPD290Py

MSRP: $95.88 each driver


PRV Audio WG17-25 Screw-On Waveguide

PRV Audio's WG17-25 60° x 40° bi-radial horn is designed to project an expanded horizontal dispersion while also reducing floor and ceiling bounce.

This horn is constructed of durable ABS plastic to keep cabinets as light as possible for easy transport. The standard 1-3/8"-18 TPI threading is compatible with many 1" compression drivers. Acoustic loading is maintained down to 1,500 Hz.

Throat Diameter: 1"

Type: Screw-On

Material: ABS Plastic

Sound Dispersion Hxv: 60° X 40°

Low Frequency Limit: 1,500 Hz

Dimensions: 6.32" W x 5.57" H x 3.18" D

Weight: 0.24 Lbs

Mounting Depth: 3.18" (81 mm) waveguide only

MSRP: $6.98 each